W1200 Plastic Pipes Hydraulic Butt Welding Machine

  • Up to 32 Bar PE – PP – PVDF pipes and fittings 1000 – 1200 – 1400 – 1600 mm diameters are used in the source.
  • ISO 12176 – 1 provides powerful, easy, and serial welding with the shortest operational installed in accordance with international standards.
  • Thanks to its lightweight structure, it provides easy operation.
  • The maximum operating pressure is designed as 200 Bar.
  • Suitable for operating at an ambient temperature of -10 C° ~+40 C°.
Main Body
Trimmer
Heater
Control Unit
Housing Box

The main body provides the fixed and centering of the plastic pipes on which to be welded with two moving and two fixed clamps.

The hydraulic pressure force is applied to the system. With two pistons located on the carrier shaft, this force directs the moving clamps back and forth, making the movement necessary for welding to take place.

It is the forehead welding machine element that cleans the forehead and makes it ready to heat the pipes fixed and centered on the main body with the two rotating blades located on the right and left sides and the cutting blades on these wings.

The rotating movement of the shaver is provided by the motor and reducer group located on it.

W1600 Forehead Welding Machine shaving unit creates burpless and parallel pipe surfaces.

The pipe brought to the desired roughness by the shaving process is the forehead welding machine element that heats the surfaces of the forehead with a heating plate and prepares for the assembly process.

The temperature setting of the heater is done with the digital heat setting thermostat located on the heater plate.

Electrical and hydraulic control unit; hydraulic pressure to the heater and shaver, which is necessary for the operation of the machine.

The control unit is operated by hand control. The hand controller has four buttons and a key on it. The buttons move the moving clamps back and forth. The switch runs the shaver.

Housing and support box prevents the heat loss of the heater and protects the trimmer from the exterior effects in a manner supporting the heater (against impacts, water, etc.)

Technical Specifications
Content
Packaging Details
Technical Specifications
Welding Diameter / Welding RangeØ 1000 mm – Ø 1600 mm

(Ø1000 mm, Ø1200mm, Ø1400 mm, Ø1600mm)
Material Type / Pipe Types to WeldPE – PP – PVDF
Pipe Max. PressurePN32
Heater Electric Power380 V – 24 kW
Trimmer Electric Power380 V – 4 kW
Power of Hydraulic Unit380 V – 2.2 kW
Electric SystemTriple Phase
Total Electricity Consumption30.20 kW
Operating Pressure200 Bar
Required Generator Power50 kVA
Operating Temperature / Working Temperature(-10 C° ~ + 40 C°)
Hydraulic OilHydraulic 46 / 6 lt
Content
User Manual1 name/ pcs
Main Body1 name/ pcs
Trimmer1 name/ pcs
Heater1 name/ pcs
Enclosure and Support Box / Protective Casing1 name/ pcs
Stuffer12 names/pcs
Tool Bag1 name / pcs
Packaging Details
Type of PackageOpen-Stretch
Number of Packages3 packs / pack
Dimensions2.15 x 2.40 x 2.40

1.00 x 2.30 x 2.25
Total Volume17.75 m3
Total Net Weight4,650 kg
Total Gross Weight4,670 kg